K24 Connecting Rods Lightweight and Turbo K24 Rods

Molnar Technologies

Molnar Technologies H Beam K24 rods are machined from billet 4340 steel, and then heat treated to provide improved strength. To make the rods even stronger, they are shot peened to which also increases fatigue life. All Molnar Honda K24 connecting rods are fitted with highly durable premium bronze bushings for use with floating pin type pistons. Each rod set for the K24 engines includes ARP fasteners, moly lubricant and installation guidelines.

All Molnar Honda K24 connecting rods are finished in the United States at the Molnar Technologies shop in Michigan. Critical rod dimensions are are held to very precise tolerances of +/- .0001 of an inch, which is the tightest tolerance you will find in the performance and racing aftermarket. These rods are an excellent upgrade component for high performance and racing K24 engines.

We have two different rod sets for use in the K24 engine. The lightweight set is intended for use in normally aspirated engines with no power adders. The Turbo set is for use in turbocharged, supercharged or nitrous boosted engines. If you have any questions about which set is the best choice for your engine project please do not hesitate to contact us for assistance.

H Beam Honda K24 Connecting Rods

Molnar Honda K24 Turbo connecting rods

K24 Lightweight Rod

Molnar Honda K24 Connecting Rod Specs Part Numbers and Application Info

  • Length Length of the connecting rod, as measured center to center, in inches.
  • Notes Additional information about specific applications
  • Wt Weight in grams, of one complete connecting rod assembly
  • Bolt Size 3/8 diameter Rods come with ARP2000 fasteners installed
  • Jrnl Crank rod journal diameter
  • Pin Piston pin diameter, in inches or millimeters
  • BE Width of the crankshaft end of one rod
  • PE Width of the piston end of one rod
  • Part Number Molnar Technologies Connect Rod set part number
  • Price The price shown is for a complete set of rods for the engine.
Length Notes Wt Jrnl Pin BE PE Part Number

Honda K24 Engine Rods

5.984 Honda K24 Turbo 535 Stock 22mm 0.782 0.782 HH5984FFB4-A

$479.73 $414.34
5.984 K24 Lightweight 451 Stock 22mm 0.782 0.782 HH5984FFB-L4-A

$479.73 $414.34

 

If you did not find the Honda con rods you need, please contact us for assistance. New models are constantly in development so we may have piston rods available that have not been added to this site yet.