Molnar Technologies H Beam 2JZ connecting rods are machined from billet 4340 steel, and then heat treated to provide improved strength. To make the rods even stronger, they are shot peened to which also increases fatigue life. All Molnar 2JZ engine connecting rods are fitted with highly durable premium bronze bushings for use with floating pin type pistons. Each rod set for the 3.0L 2JZ engines includes ARP fasteners, lubricant and installation guidelines.
All Molnar Toyota H beam connecting rods are finished in the United States at the Molnar Technologies shop in Michigan. Critical rod dimensions are are held to very precise tolerances of +/- .0001 of an inch, which is the tightest tolerance you will find in the performance and racing aftermarket. These rods are an excellent upgrade component for street, high performance and racing 2JZ engines.
2JZ Performance Parts H Beam 3.0 Toyota 2JZ Rods
Molnar Toyota 2JZ Connecting Rod Specs Part Numbers and Application Info
- Length Length of the connecting rod, as measured center to center, in inches.
- Notes Additional information about specific applications
- Wt Weight in grams, of one complete connecting rod assembly
- Bolt Size 3/8 diameter Rods come with ARP2000 fasteners installed
- Jrnl Crank rod journal diameter
- Pin Piston pin diameter, in inches or millimeters
- BE Width of the crankshaft end of one rod
- PE Width of the piston end of one rod
- Part Number Molnar Technologies Connect Rod set part number
- Price The price shown is for a complete set of rods for the engine.
| Part Number | Length | Notes | Wt | Jrnl | Pin | BE | PE |
|---|---|---|---|---|---|---|---|
Toyota 3.0L 6 Cylinder 2JZ Series Engines includes 2JZ 2JZ-GE 2JZ-GTE and 2JZ-FSE |
|||||||
| TH5590MFB6-A
|
5.590 | all 2JZ models | 578 | Stock | 22mm | 1.020 | 1.000 |
|
TH5590MFB-T6-A
|
5.590 |
PWR ADR™ Series Rods 2JZ-GTE (all 2JZ models) Extra heavy duty for High boost or boost and nitrous. Recommended when using more than 20psi boost. |
644 | Stock | 22mm | 1.020 | 1.000 |
The 2JZ series engine has been used in the following model vehicles (and others):
- Altezza AS300
- Aristo
- Crown
- Crown Majesta
- Mark II
- Chaser
- Cresta
- Progres
- Soarer
- Supra MK IV
- Supra RZ / Supra Turbo JZA80
- Lexus GS300
- Lexus IS300
- Lexus SC 300
If you did not find the Toyota connecting rods you need, please contact us for assistance. New models are constantly in development so we may have piston rods available that have not been added to this site yet.