LS1 Connecting Rods | GM LS Engine Rods

Molnar LS1 Connecting Rods

Molnar Technologies H Beam LS1 rods are machined from billet 4340 steel, and then heat treated to provide improved strength. To make the rods even stronger, they are shot peened to which also increases fatigue life. All Molnar GM LS connecting rods are fitted with highly durable premium bronze bushings for use with floating pin type pistons. Each rod set for the LS engines includes ARP fasteners, lubricant and installation guidelines.

All Molnar LS, LS1, LS2, LS7 rods are finished in the United States at the Molnar Technologies shop in Michigan. Critical rod dimensions are are held to very precise tolerances of +/- .0001 of an inch, which is the tightest tolerance you will find in the performance and racing aftermarket.

Molnar H Beam LS Rods

H Beam LS1 rods

LS LS2 LS7 connecting rod

 

Molnar LS1 Rods Specs and Prices

The rods listed on this page are for use in the GM and Chevy LS series engines. Please check dimensions to insure you select the correct rod set for your application. If you need assistance please do not hesitate to contact us for help.

  • Length Length of the connecting rod, as measured center to center, in inches.
  • Wt Weight in grams, of one complete connecting rod assembly
  • Desc Additional information about specific applications
  • Jrnl Crank rod journal diameter
  • Pin Size Piston pin diameter, in inches or millimeters
  • BE Width of the crankshaft end of one rod
  • PE Width of the piston end of one rod
  • Bolts Rods come with 7/16" diameter ARP2000 fasteners installed
  • Part Number Molnar Technologies Connect Rod set part number
  • Price The price shown is for a complete set of rods for the engine
Part Number Length Wt Desc Jrnl Pin BE PE

Chevy LS Series Connecting Rods

CH6125NLB-LS8-A

$798.60 $689.75
6.125 Chevy LS 602 6.125 LS Engine 2.100 0.927 0.940 1.010

CH6125NLB-LST8-A

$844.11 $729.06
6.125 654

LS1 Chevy

Extra heavy duty PWR ADR series rods for big boost and or big nitrous

 2.100 0.927 0.940 1.010
CH6125NLB-LSTST8-A

$905.36 $781.96
6.125 642

LS1 Chevy

PWR ADR series rods for big boost and or big nitrous

Stroker rods provide additional clearance when using a stroker crank. Recommended when using a 4.100 or longer stroke crankshaft.

 2.100 0.927 0.940 1.010

CH6125NLB-LSP+8-A

$1171.81 $1012.09
6.125 737

Chevy LS PWR ADR Plus™ 6.125

For extreme high output engines

 2.100 0.927 0.940 1.040

CH6200NLB-LS8-A

$798.60 $689.75
6.200 620 LS1 Chevy 2.100 0.927 0.940 1.010

CH6200NLB-LST8-A

$844.11 $729.06
6.200 684

Chevy LS PWR ADR Series Rods

Chevy Molnar LS power adder rods for big boost and or big nitrous engine Extra heavy duty

2.100 0.927 0.940 1.010

CH6200NLB-LSP+8-A

$1171.81 $1012.09
6.200 757

Chevy LS PWR ADR Plus™ Series 6.200

For extreme high output engines

 2.100 0.927 0.940 1.010

CH6300NLB-LST8-A

$844.11 $729.06
6.300 701

GM LS series engine

Extra heavy duty PWR ADR series rods for big boost and or big nitrous

 2.100 0.927 0.940 1.010

If you do not find the LS1 connecting rods you need, please contact us for assistance. New models are constantly in development so we may have rods available that have not been added to this site you.

Comments

  1. Charles Brooks says:
    November 20, 2018 at 5:45 am

    I have a Dragon slayer Callies crankshaft for a LS1. It has a 3.500 stroke with a 2″ pin size. Would you have a connecting rod for this setup? It will be going into a boosted motor but it will be for street use only so boost levels will not be very high (probably only 8-10 lbs).

  2. molnarrods says:
    November 20, 2018 at 1:01 pm

    Hello Charles,

    At this time there are no Molnar Rods LS series engine connecting rods that are made for use with the 2.000 rod pin size. Thank you for checking with us, sorry we could not provide the rods you need at this time.

Leave a Reply to Charles Brooks Cancel reply