Waverunner SHO Rods | Molnar H Beam Yamaha SHO Connecting Rods

Molnar Technologies

Molnar Technologies H Beam Yamaha Waverunner SHO connecting rods are machined from billet 4340 steel, and then heat treated to provide improved strength. To make the rods even stronger, they are shot peened which also increases fatigue life. All Molnar Waverunner engine rods are fitted with highly durable premium bronze bushings for use with floating pin type pistons. Each rod set for the Waverunner SHO engine includes ARP fasteners, lubricant and installation guidelines.

All Molnar Waverunner SHO conrods are finished in the United States at the Molnar Technologies shop in Michigan. Critical rod dimensions are are held to very precise tolerances of +/- .0001 of an inch, which is the tightest tolerance you will find in the performance and racing aftermarket. These rods are an excellent upgrade component for street, high performance and racing Waverunner SHO engines.

H Beam Waverunner SHO Connecting Rods

Molnar Waverunner SHO rods

Yamaha Waverunner SHO connecting rods

Molnar Yamaha Waverunner SHO Connecting Rod Specs Part Numbers and Application Info

  • Length Length of the connecting rod, as measured center to center, in inches.
  • Notes Additional information about specific applications
  • Wt Weight in grams, of one complete connecting rod assembly
  • Bolt Size 3/8 diameter Rods come with ARP2000 fasteners installed
  • Jrnl Crank rod journal diameter
  • Pin Piston pin diameter, in inches or millimeters
  • BE Width of the crankshaft end of one rod
  • PE Width of the piston end of one rod
  • Part Number Molnar Technologies Connect Rod set part number
  • Price The price shown is for a complete set of rods for the engine.

Yamaha Waverunner SHO Engine

NOTE: Use 2011 or earlier model rod bearing with these rods. Yamaha moved the bearing tang on 2012 and later model factory rods so to use these Molnar H beam rods you have to use the 2011 and earlier model rod bearings even if you are installing these in a 2012 or newer model engine.

Part Number Length Notes Wt Jrnl Pin BE PE

YH5710BFB4-A

NOTE: Use 2011 or earlier model rod bearing with these rods. Yamaha moved the bearing tang on 2012 and later model factory rods so to use these Molnar H beam rods you have to use the 2011 and earlier model rod bearings even if you are installing these in a 2012 or newer model engine.

$612.55 $529.06
5.710

Waverunner SHO

511 Stock 22mm 1.056 .824

YH5710BFB-12H4-A

Waverunner SHO Extra heavy duty rods for use with high boost levels and/or nitrous

Use 2012 and later model rod bearing

$612.55 $529.06
5.710

Waverunner SHO

557 Stock 22mm 1.056 .824

If you did not find the Yamaha Waverunner SHO performance parts you need, please contact us for assistance. New parts are constantly in development so we may have piston rods available that have not been added to this site yet.