Molnar Technologies H Beam Ford 3.7 Cyclone connecting rods are machined from billet 4340 steel, and then heat treated to provide improved strength. To make the rods even stronger, they are shot peened which also increases fatigue life. All Molnar Cyclone 3.7L Power Adder rods are fitted with highly durable premium bronze bushings for use with floating pin type pistons. Each rod set for the six cylinder Ford 3.7 engines includes ARP fasteners, lubricant and installation guidelines.
These rods are for use in the Ford 3.7 Cyclone engines. They are specifically designed for high output turbo, supercharged or large nitrous system applications but are also suitable for other performance and racing applications where you need a high strength durable connecting rod..
All Molnar 3.7 conrods are finished in the United States at the Molnar Technologies shop in Michigan. Critical rod dimensions are are held to very precise tolerances of +/- .0001 of an inch, which is the tightest tolerance you will find in the performance and racing aftermarket. These rods are an excellent upgrade component for high performance and racing Cyclone engines.
H Beam Cyclone 3.7L Connecting Rods
Molnar 3.7 Cyclone Power Adder Rods | Specifications, Part Numbers and Application Info
- Length Length of the connecting rod, as measured center to center, in inches.
- Notes Additional information about specific applications
- Wt Weight in grams, of one complete connecting rod assembly
- Bolt Size 7/16 diameter Rods come with ARP2000 fasteners installed
- Jrnl Crank rod journal diameter
- Pin Piston pin diameter, in inches or millimeters
- BE Width of the crankshaft end of one rod
- PE Width of the piston end of one rod
- Part Number Molnar Technologies Connect Rod set part number
- Price The price shown is for a complete set of rods for the engine.
Cyclone Ford 3.7 Power Adder Connecting Rods |
|||||||
Part Number | Length | Notes | Wt | Jrnl | Pin | BE | PE |
---|---|---|---|---|---|---|---|
FH6011BDJB-T6-A
|
6.011 |
Power Adder series. Extra heavy duty for Big boost turbocharged, supercharged or boost and nitrous engines. |
648 | Stock | 23mm | .854 | .954 |
If you did not find the Ford Cyclone engine conrods you need, please contact us for assistance. New models are constantly in development so we may have Ford piston rods available that have not been added to this site yet.
Leave a Question or Comment
You must be logged in to post a comment.