Ford 300 Inline 6 Connecting Rods

Molnar 300 Inline 6 Rods

Are you looking for the ultimate Ford 300 connecting rods for your high output engine project? Molnar Technologies H Beam Ford 300 inline 6 rods are machined from billet 4340 steel, and then heat treated to provide improved strength. To make the rods even stronger, they are shot peened to which also increases fatigue life. Molnar 300 Inline 6 rods are available fitted with highly durable premium bronze bushings for use with floating pin type pistons or in a non-bushed model for use with a press fit wrist pin. Each rod set for the Ford 300 inline 6 engines includes Molnar’s proprietary ARP2000 fasteners, lubricant and installation guidelines.

Since the 300 Ford Inline Six engines are capable of very big torque and HP numbers when using boost and or nitrous Molnar makes these rods in the extremely popular Power Adder version rods for this engine to cover a wide range of applications from mild to wild.

All Molnar Ford 300 Inline 6 Power Adder connecting rods are finished in the United States at the Molnar Technologies shop in Michigan. Critical rod dimensions are are held to very precise tolerances of +/- .0001 of an inch, which is the tightest tolerance you will find in the performance and racing aftermarket.

Molnar H Beam Ford 300 Rods

Ford 300 Power Adder Rods

300 Inline 6 H beam rods

 

Ford 300 Connecting Rods Specs and Prices

  • Length Rod length of the connecting rod, as measured center to center, in inches.
  • Wt Weight in grams, of one complete connecting rod assembly
  • Notes Additional information about specific applications
  • Jrnl Crank rod journal diameter
  • Pin Size Piston pin diameter, in inches or millimeters
  • BE Width of the crankshaft end of one rod
  • PE Width of the piston end of one rod
  • Bolts Rods come with 7/16" diameter ARP2000 fasteners installed.
  • Part Number Molnar Technologies Connect Rod set part number
  • Price The price shown is for a complete set of rods for the engine
Part Number Length Wt Notes Jrnl Pin BE PE

Ford 300 Inline 6 Connecting Rods

FH6210AKPB-T6-A

$747.49 $645.61
6.210 733

300 Ford Inline 6 cylinder, full floating pin

Ford 300 Power Adder rods, For use with turbo, supercharger or large nitrous shot

 2.123 0.975 0.990 1.010

FH6210AKPP-T6-A

$747.49 $645.61
6.210 733

300 Ford Inline 6 cylinder, press fit pin

Ford 300 Power Adder rods, For use with turbo, supercharger or large nitrous shot

 2.123 0.975 0.990 1.010

FH6800AKKB-T6-A

$747.49 $645.61
6.800 767

240 Ford Inline 6 cylinder and can be used in 300 Inline Six with correct piston to match the long rod, full floating pin

6.800 long with .912" diameter wrist pin

Power Adder series, For use in high output normally aspirated engines and with turbo, supercharger or large nitrous shot

 2.123 0.912 0.990 1.010

 

If you do not find a set of Ford 300 connecting rods with the specifications that you need please contact us for assistance. New models are constantly in development so we may have rods available that have not been added to this website yet.

Leave a Question or Comment