Ford 7.3 Godzilla Connecting Rods

Molnar 7.3 Connecting Rods

Are you looking for the ultimate 7.3 Godzilla rods for your high output engine project? Molnar Technologies H Beam Ford 7.3 Godzilla rods are machined from billet 4340 steel, and then heat treated to provide improved strength. To make the rods even stronger, they are shot peened to which also increases fatigue life. All Molnar Godzilla 7.3 connecting rods are fitted with highly durable premium bronze bushings for use with floating pin type pistons. Each rod set for the Ford 7.3 Godzilla engines includes Molnar’s proprietary ARP2000 fasteners, lubricant and installation guidelines.

Since the Godzilla engines are capable of very big torque and HP numbers when using boost and or nitrous Molnar makes both the Godzilla Power Adder and the Godzilla Power Adder Plus series connecting rods for this engine to meet the extreme demands of your project.

All Molnar Ford 7.3 connecting rods are finished in the United States at the Molnar Technologies shop in Michigan. Critical rod dimensions are are held to very precise tolerances of +/- .0001 of an inch, which is the tightest tolerance you will find in the performance and racing aftermarket.

Molnar H Beam Ford 7.3 Rods

Godzilla Connecting Rods

Molnar Godzilla Power Adder Rod


Ford Modular Godzilla 7.3 Rods Specs and Prices

  • Length Rod length of the connecting rod, as measured center to center, in inches.
  • Wt Weight in grams, of one complete connecting rod assembly
  • Notes Additional information about specific applications
  • Jrnl Crank rod journal diameter
  • Pin Size Piston pin diameter, in inches or millimeters
  • BE Width of the crankshaft end of one rod
  • PE Width of the piston end of one rod
  • Bolts Rods come with 7/16" diameter ARP2000 fasteners installed.
  • Part Number Molnar Technologies Connect Rod set part number
  • Price The price shown is for a complete set of rods for the engine
  • Rod Bearings Use either Godzilla or Ford 4.6 / 5.4 Modular rod bearings
Part Number Length Wt Notes Jrnl Pin BE PE

Ford 7.3 H-Beam Rods


$834.88 $721.09
6.319 715

Godzilla 7.3 Power Adder rods for pistons using .990 diameter wrist pins

Designed specifically for use in boosted engines using large nitrous shots, turbocharging or supercharging and high boost pressures.

2.086 .990 .978 1.010


$1171.81 $1012.09
6.319 788

Godzilla 7.3 Power Adder Plus rods for pistons using .990 diameter wrist pins

Designed specifically for use in extremely high output boosted engines using very large nitrous shots and/or, turbocharging or supercharging and high boost pressures.

2.086 .990 .978 1.010


If you do not find a set of Godzilla connecting rods with the specifications that you need please contact us for assistance. New models are constantly in development so we may have rods available that have not been added to this website yet.

Leave a Question or Comment